17 entering the number of prints to be made, 1 to 9, 10 to 99 – Konica Minolta MS7000 MKII User Manual
Page 67: Correcting a number, 17 entering the number of prints to be made -34, 1 to 9 -34 10 to 99 -34 correcting a number -34
Scanner
3
3-34
3.17
Entering the Number of Prints to be Made
NOTE:
This function is only available on the PR mode.
1 to 9
1
Enter the desired number of
prints using the Multiprint
Key "1".
If the "1" key is pressed when "9" is shown on the Multi-Print
Display, the number on the display is incremented by one: 10
→
11
→ 12 ...
10 to 99
1
Set the tens digit using the
"10" key.
2
Set the units digit using the
"1" key.
To set "25," press the "10"
key twice and press the "1"
key four times.
Correcting a Number
1
To reset an entry, press the
Clear/Stop key, which resets
the number on the Multi-
Print Display to "1."
This manual is related to the following products: