Konica Minolta MS7000 MKII - Manual (Page 142)

8 Miscellaneous
8-6
Entering and Leaving the User Mode
1 Hold down the Shift key and Paper Selection key at the same time for
0.5 sec.
The Multi-Print Display displays a “U.”
Paper Selection
11 Ч17
1 2 /
8 Ч11
8 Ч11
1 2 /
User Mode
C
Shift
2 Press the Exposure Adjustment key (Darker or Lighter) to select the
specific function.
Darker Pressing the Darker key selects the function in the following
order: U
→ U1→ U2 → U3 .. → U8.
Lighter Pressing the Lighter key selects the function in the following
order: U8
→ U7→ U6 → U5 .. → U.
3 Press the Exposure Mode key to display d(*).
*: Current setting value
Auto
4 Press the Exposure Adjustment key (Darker or Lighter) to select the
specific setting value.
Darker Pressing the Darker key selects the setting value in the
following order: d0
→ d1 ..
Lighter Pressing the Lighter key selects the setting value in the
following order: d5
→ d4 ....d0
5 Press the Start key to validate the setting value.
If the Exposure Mode key is pressed, the setting value is not validated
and the User mode initial screen (U) appears.
If a new function is to be set, start the procedure over beginning with
step 2.
6 Press the Clear key.
This lets you leave the User mode, returning back to the ordinary
mode.