Konica Minolta MS7000 MKII - Manual (Page 129)

Maintenance 7
7-3
Cleaning the System Printer (Option)
Clean the Printer at regular intervals.
Cleaning the MSP 3500 Printer
When does the printer need cleaning?
Clean this item thoroughly... After...
Exterior Once a month or as needed, whichever
comes first.
Interior (paper feed rollers) Paper stops being fed from the paper
tray(s).
Note: We recommend that you do not clean elsewhere inside the printer.
If necessary, contact the authorized dealer.
What cleaning materials should I use?
Exterior
⎯
Use Exterior
⎯
Avoid
A soft dry cloth to clean the control
panel. Sharp or rough implements (such as
wire or plastic cleaning pads or
brushes); liquids.
A soft, wrung-out damp cloth to clean
the outside of the printer. Aerosol or pump-sprayed cleaners; too
much dampness in the cloth.
Mild neutral detergent to clean the
outside of the printer, if necessary. Abrasive or corrosive solutions that
contain solvents (such as alcohol,
benzine, or thinners).
Interior Paper Feed Rollers
⎯
Use Interior
⎯
Avoid
A soft dry clean cloth. Sharp or rough implements (such as
wire or plastic cleaning pads or
brushes); any liquids.