Konica Minolta MS7000 MKII - Manual (Page 143)

Miscellaneous 8
8-7
Settings in Each User Mode Function
U1: Special Print Mode
This function is not available.
U2: Engineering Enhancement Mode
Slight image distortion occurring in the scan direction can be corrected
with this function.
Before Correction After Correction
1 Select U2 in the User mode.
2 Press the Exposure Mode key to display d*.
3 Press the Exposure Adjustment key (Darker or Lighter) to select the
desired setting value.
4 Press the Start key to validate the setting value.
NOTE:
This setting returns to the default value when the Power Switch
is turned OFF.
You can register the setting value using with the Job Program.
See p. 3-45.