Konica Minolta MS7000 MKII - Manual (Page 38)

3 Scanner
3-5
3.4 Control Panel Keys and Indicators
Control Panel 1 (Basic)
Start 10 1 C
Auto Lighter Darker
Exposure Paper Selection Print Position Print Mode
Text
Fine
Photo
Film Type
Auto
Nega
Posi 1 2
A4
A3
A4
Paper Selection
11 Ч17
1 2 /
8 Ч11
8 Ч11
8 Ч14
1 2 / Ohter
1 2 /
1
2 3 4 5 6
7 8
9 12 13 14 10
11 15
1 Memory Input Key
To store one of the following functions into the memory of the Scanner,
first set one of the functions on Control Panels 1 and 2 and then press this
button with the head of a pen or other device. The next time the scanner
is turned ON, that function will appear as a default setting until a new one
is entered. (Maximum three kind of setting can be memorized.)
1) Negative or positive
2) Print mode
3) Print position*
4) Paper size*
5) Print image density
6) Exposure mode
7) Centering or Fit
8) Manual Masking
9) Auto Masking
10) Auto Skew Correction
11) Horizontal Area setting
12) Vertical Area setting
13) Electrical Zoom magnification
14) Resolution
15) Image Distortion Correction
*If the current paper tray or cassette is different from that loaded when the
Paper size setting was made, Center Image Print is selected for the print
position and the current paper size is selected.
If you do not press the pinhole for at least 60 seconds after a
setting has been made with the Auto Reset function set to ON, the
previous setting remains valid.
→ See page 8-4.