Konica Minolta bizhub C353 - Manual (Page 95)

C353/C253/C203 1-82
Setup items by operation 1
1.29 Using SSL for communication from this machine to Vista with Web
Service
!
Detail
To use SSL for communication between this machine and a computer, SSL communication settings
must be specified on both this machine and the computer. Execute both settings described in this
section and
"Using SSL for communication from Vista to this machine with Web Service" on
page 1-81 .
When using the Web Service Function, specify settings for SSL-based encryption of communication from this
machine to a Windows Vista-equipped computer. These settings ensure safer file transmission by encrypting
Web service-based communication using SSL.
Specify the settings according to the following flowchart.
!
Detail
To encrypt communication from this machine to a Windows Vista-equipped computer using SSL,
create a certificate at the computer side in advance to associate the computer with the TCP/IP
communication port (Default setting : Port Number 5385).
1.29.1 TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2 .
1.29.2 Web Service Common Settings
In Administrator mode of PageScope Web Connection, select the Network tab - "Web Service Settings" -
"Web Service Common Settings".
Specify the following settings.
TCP/IP Settings
Web Service Common Settings
Action for Invalid Certificate
Finish
Item Definition Prior confirmation
Friendly Name Specify setting for Friendly Name (up to 62 characters).
SSL Setting Select "Enable".