Konica Minolta bizhub C353 - Manual (Page 138)

C353/C253/C203 1-125
Setup items by operation 1
1.42 Using the TCP Socket/OpenAPI function
Specify settings for TCP Socket, and OpenAPI of this machine.
TCP socket is used during data transmissions between the computer application and this machine.
To synchronize this machine with a different OpenAPI-based system, specify settings for OpenAPI.
If authentication is perfomed with PageScope Authentication Manager, specify the SSL/TLS settings, and
then enable the SSL/TLS settings of the TCP Socket and OpenAPI settings.
Specify the settings according to the following flowchart.
1.42.1 TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2 .
1.42.2 SSL/TLS Setting
Specify settings for SSL-based communication.
For details, refer to "Creating a certificate for this machine for SSL-based communication" on page 1-7 .
TCP/IP Settings
➀ TCP Socket
➁ OpenAPI
➀ ➁
Communicate using SSL? Communicate using SSL?
Yes No No Yes
SSL/TLS Setting SSL/TLS Setting
TCP Socket Setting OpenAPI Setting
Finish