Konica Minolta bizhub C353 - Manual (Page 169)

C353/C253/C203 1-156
Setup items by operation 1
When "E-mail" was selected using [New Registration]
When "FTP" was selected using [New Registration]
When "SMB" was selected using [New Registration]
Item Definition
No. Specify the registration number ("Use opening number" or "Direct Input").
Name Type in the address name (up to 24 characters).
Index Specify the index characters for the destination. To normally display the destination in the
control panel, select the "Main" check box.
E-mail Address Enter the address for the destination (up to 320 characters).
Registration of Certifica-
tion Information Select this check box to register certificate information.
Select the "Registration of Certification Information" check box. Click [Browse...], and
then specify the certificate information. Only files in the DER (Distinguished Encoding
Rules) format are supported for certificate information. To delete the certificate informa-
tion, select "Deletion of Certification Information".
If the E-Mail address to be registered does not match the E-Mail address of the certificate,
the certificate cannot be registered. Confirm whether both E-Mail addresses match, and
then register the certificate.
Limiting Access to Desti-
nations Specify the group that is allowed to access a destination and reference allowed level.
Item Definition
No. Specify the registration number ("Use opening number" or "Direct Input").
Name Type in the address name (up to 24 characters).
Index Specify the index characters for the destination. To normally display the destination in the
control panel, select the "Main" check box.
Host Address Specify the IP address of the FTP server of the destination.
If the DNS server is specified, the address can be specified using the host name (up to 63
characters).
File Path Specify the directory of the destination (up to 96 characters).
User ID Type in the user ID for logging in to the FTP server of the destination (up to 47 characters).
Password Type in the password for logging in to the FTP server of the destination (up to 31 charac-
ters).
anonymous Specify whether even an anonymous user can access the destination.
PASV Mode Register whether to make communication in the PASV mode.
Proxy Specifies whether or not a proxy server is used.
Port Number Specify the port number to be used.
Limiting Access to Desti-
nations Specify the group that is allowed to access a destination and reference allowed level.
Item Definition
No. Specify the registration number ("Use opening number" or "Direct Input").
Name Type in the address name (up to 24 characters).
Index Specify the index characters for the destination. To normally display the destination in the
control panel, select the "Main" check box.
Host Address Specify the IP address of the computer of the destination.
If the DNS server is specified, the address can be specified using the host name (up to
255 characters).
File Path Specify the directory of the destination (up to 255 characters).
User ID Type in the user ID for logging in to the computer of the destination (up to 127 characters).
Password Type in the password for logging in to the computer of the destination (up to 14 charac-
ters).
Limiting Access to Desti-
nations Specify the group that is allowed to access a destination and reference allowed level.