Konica Minolta bizhub C353 - Manual (Page 68)

C353/C253/C203 1-55
Setup items by operation 1
1.17 Sending and receiving IP address faxes
Specify settings for sending and receiving IP address faxes.
To use the IP address fax function, this machine must be equipped with an optional fax kit. In order to use
the IP address fax function, setting by a service engineer is required. For details, contact your service
representative.
The IP address fax enables communication on the IP network. Specify the host name or IP address for the
destination to send a Fax. SMTP protocol is used for sending and receiving faxes. Because IP address faxes
are sent and received via the SMTP server function of this machine, no SMTP server is required.
Specify the settings according to the following flowchart.
2
Note
For details on registering IP address fax addresses, refer to "Registering or editing an address book
destination" on page 1-155 .
For details on the IP address fax operation, refer to the User’s Guide [Network Scan/Fax/Network Fax
Operations].
1.17.1 TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2 .
1.17.2 IP Address Fax Function
On the Administrator Settings screen of the control panel, select [Network Settings] - [2 Network Fax Setting]
- [1 Network Fax Function Setting].
Specify the following setting.
2
Note
For details on displaying the Network Setting screen, refer to "Displaying the Network Settings
screen" on page 2-2 .
TCP/IP Settings
IP Address Fax Function
SMTP TX Setting
SMTP RX Setting
Header Information
Finish