Konica Minolta bizhub C353 User Manual
Page 215
C353/C253/C203
3-11
Appendix
3
Transmission source record
When a fax has been sent, the transmission time, name, telephone number, page
number that is to be printed at the edge of the document saved on the recipient’s
machine.
Transmission time
The time needed to send a fax. The higher the resolution or larger the paper, the long-
er the transmission takes.
TrueType
An outline font. It was developed by Apple Computer and Microsoft. It is used as a
standard by Macintosh and Microsoft Windows.
It can be used both on a display and in print.
TSI
Abbreviation for Transmitting Subscriber Identification. ID of the fax transmission ter-
minal.
TWAIN
The interface standard for imaging devices, such as scanners and digital cameras,
and for applications, such as graphics software.
In order to use a TWAIN-compliant device, the TWAIN driver is required.
Uninstall
To delete software installed on a computer.
USB
Abbreviation for Universal Serial Bus.
A general interface standard for connecting a mouse, printer, and other devices to a
computer.
V34
This is a communication mode used at the time of fax communication of super G3.
There are cases when the communication is not possible in super G3 mode depend-
ing on the telephone line conditions when the recipient’s machine/ own machine is
connected to a telephone line via private branch exchange. In such cases, it is rec-
ommended to communicate with super G3 mode turned off by deselecting the V34.
Web browser
Software for viewing Web pages.
Internet Explorer and Netscape Navigator are this type of software.
WINS
Abbreviation for Windows Internet Naming Service. A service for recalling name serv-
ers for the conversion of computer names and IP address in a Windows environment.
Zone
A name given in an AppleTalk network. This is used to group multiple devices on an
AppleTalk network.
Z-Folded Original
This function first confirms the document size which cannot detect correct document
size due to folds, then scans and sends the document data after verifying the correct
document size. This function can be used only when the document is scanned by
ADF.
Term
Description