3 status notification setting, Status notification setting -88, Status notification setting – Konica Minolta bizhub C353 User Manual
Page 101
C353/C253/C203
1-88
Setup items by operation
1
1.31.3
Status Notification Setting
In Administrator mode of PageScope Web Connection, select the Maintenance tab - "Status Notification
Setting" - "E-mail Address" - [Edit].
Specify the following settings.
Max Mail Size
Select whether to limit the size of sent messages.
Server Capacity
To limit the maximum mail size, specify the max. allowance
of the mail size including the attached file.
Mails exceeding the maximum allowance are removed.
If a mail is separated, this setting is disabled.
Receiving limit of the
server
Admin. E-mail Address
Displays the administrator address.
If the administrator address is not specified, specify it at
"Machine Setting".
Address for the adminis-
trator
Binary Division
To divide an E-Mail, select the "Binary Division" check box.
If the mail software used for receiving mails does not have
the mail restore function, the mails may not be read.
Restore function of the
mail soft
Divided Mail Size
To divide the mail, specify a divided mail size.
Receiving limit of the
server
Item
Definition
Prior confirmation
Item
Definition
Prior confirmation
Notification Address
Specify the notification address.
Notification address
Replenish Paper Tray
Provides notification when a paper-out condition occurs.
JAM
Provides notification when a paper misfeed occurs.
PM Call
Provides notification when a periodic inspection is required.
Replace Staples
Provides notification when a staple-out condition occurs.
Replenish Toner
Provides notification when a toner-out condition occurs.
Finisher Tray Full
Provides notification when the finisher tray becomes full.
Service Call
Provides notification when a service call occurs.
Job Finished
Provides notification when the job is completed.