Konica Minolta bizhub C353 - Manual (Page 182)

C353/C253/C203 1-169
Setup items by operation 1
1.48.4 Registering or editing destinations to be temporarily used
Register destinations to be temporarily used or change temporarily used destination settings.
!
Detail
If "Manual Destination Input" is specified to "Allow", "Temporary One-Touch" is displayed. Specify
settings for "Manual Destination Input" from the control panel.
Temporary One-Touch
In Administrator mode of PageScope Web Connection, select the Store Address tab - "Temporary One-
Touch".
The settings are the same as the program destination settings. For "Temporary One-Touch", the settings for
"Limiting Access to Destinations" are not displayed. For details on settings for "Temporary One-Touch", refer
to
"Registering or editing a program destination" on page 1-160 .
Background Removal Adjust the density of the background.
Scan Size Specify the original size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is
selected, specify the height and width.
Application Setting Click the [Display] button, and then specify settings for the functions that are displayed.
E-mail Notification Specify whether to send notification of scan data URL. Specify the notification address
for "Address". To select a destination from the list, click [Search from List].
Timer TX Specify whether to perform timer communication. If yes, enter the transmission time.
Password TX Specify whether to send the password. If yes, enter the password.
F-Code Specify whether to send the password using F code. If "Enable" is selected, type in the
SUB address and password.
Original Direction Specify the original orientation.
2-Sided Binding Direc-
tion Specify the binding orientation of the original.
Special Original Specify the original in a different size.
Book Scan Specify whether to perform book scan.
Erase Specify whether to perform frame erase.
Compose
(Date/Time) Specify whether to print the date/time.
If yes, specify settings for "Date Type", "Time Type", "Print Position", "Fine-Tune", "Color"
"Pages", and "Size".
Compose
(Page) Specify whether to print page numbers.
If yes, specify settings for "Page Number", "Chapter", "Print Position", "Fine-Tune",
"Color", and "Size".
Compose
(Header/Footer) Specify whether to print a header/footer.
If yes, specify the registration number of the header/footer. To check the registered head-
er/footer, click [Confirm Registered Contents].
Compose
(Stamp) Specify whether to print the stamp.
If yes, specify settings for "Preset Stamp" or "Registered Stamp", "Print Position", "Fine-
Tune", "Color", "Pages", and "Size". To check the registered stamp, click [Confirm Reg-
istered Contents]. To use the registered stamp function, stamps must be registered from
the control panel in advance.
Stamp Combine Method Specify the stamp composition method.
Limiting Access to Desti-
nations Click [Display], and then specify the group that is allowed to access a destination and ref-
erence allowed level.
Item Definition