27 using the ws-scan function, 1 tcp/ip settings, Using the ws-scan function -78 – Konica Minolta bizhub C353 User Manual
Page 91: Tcp/ip settings -78
C353/C253/C203
1-78
Setup items by operation
1
1.27
Using the WS-Scan function
Specify settings for scanning using Web Service Function.
Data can be scanned using the Web Service Function newly installed in Windows Vista to forward the
scanned data to the computer. The Web Service Function detects this machine connected to the network,
and then installs it as a WS-Scanner. Specifying this machine installed as a WS-Scanner when scanning from
Windows Vista allows scanning using HTTP for communication.
Specify the settings according to the following flowchart.
2
Note
For details on the WS-Scan function, refer to the User’s Guide [Network Scan/Fax/Network Fax
Operations].
1.27.1
TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to
"Specifying general settings for TCP/IP-based communication" on page 1-2
.
Finish