Konica Minolta bizhub C20X - Manual (Page 48)

Configuration Menu Overview 34
"
Manufacturer’s default settings appear in bold.
TONER NEAR EMPTY
I-UNIT NEAR EMPTY
AUTO CONTINUE
CALIBRATION
AUTO PANEL RESET
Setting
OFF / 30sec / 1min / 2min /
3min / 4min / 5min
Specify the length of time until all settings that
have not been programmed, such as the num-
ber of copies, are cleared and return to their
default settings when no operation is performed.
To set the machine to perform the auto panel
reset operation, select from 30sec, 1min, 2min,
3min, 4min or 5min for the length of time until
the auto panel reset operation is performed.
PREHEAT MODE
Setting
1 to 120 min (Default:
15 min
)
Enters Preheat mode (first stage of the energy
save mode) in order to conserve energy when
no operation is performed. Specify the length of
time in minutes until the machine enters Pre-
heat mode.
ENERGY SAVE MODE
Setting
6 to 120 min (Default: 30 min )
Enters Energy Save mode in order to conserve
energy when no operation is performed. Specify
the length of time in minutes until the machine
enters Energy Save mode.
LCD CONTRAST
Setting (LIGHT) (DARK)
Specify the brightness of the message window.