beautypg.com

Selecting a group dial destination, Selecting a group dial destination 180 – Konica Minolta bizhub C20X User Manual

Page 194

background image

Scanning With the Machine

180

The information registered for the speed dial destination appears for two
seconds.

3

Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.

4

If an e-mail address was selected, press the + or , key to select

FIN-

ISH

, and then press the Select key.

"

To add an additional e-mail address, select

ADD

in step 4, and

then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select

CHECK/EDIT

in

step 4. To delete an address, select

CHECK/EDIT

in step 4, and

then continue with step 2 of "Deleting a Specified Destination
Address".

Selecting a Group Dial Destination

A maximum of 20 group dial destinations can be registered on this machine.
(A maximum of 50 e-mail addresses can be registered with one group.) Fol-
low the procedure described below to specify e-mail addresses from the reg-
istered group dial destinations as the recipient of the scan data.

"

For details on registering e-mail addresses as group dial destinations,
refer to “Registering Group Dial Destinations” on page 191
.

"

A group dial destination containing a telephone number cannot be
used in Scan mode.

1

With the main screen (Scan mode) or

Can Use AddressBook

dis-

played, press the AddressBook key three times so that

Group DIAL

appears.

2

Use the keypad to type in the number (between 1 and 20) for the group
dial destination, and then press the Select key.
The information registered for the group dial destination appears for two
seconds.

3

Press the Select key again.

4

Press the + or , key to select

FINISH

, and then press the Select key.

"

To add an additional e-mail address, select

ADD

in step 4, and

then specify the destination.
To check the specified e-mail address, select

CHECK/EDIT

in

step 4. To delete an address, select

CHECK/EDIT

in step 4, and

then continue with step 2 of "Deleting a Specified Destination
Address".

This manual is related to the following products: