Konica Minolta bizhub C20X - Manual (Page 218)

Replacing Consumables 204
Replacing an Imaging Unit
When replacing an imaging unit, refer to the following table. For optimum print
quality and performance, use only approved KONICA MINOLTA imaging units
for your specific machine type, as listed in the table below. You can find your
machine type and the imaging unit part numbers on the consumables reorder
label inside the front cover your machine.
Note
Do not touch the OPC drum
surface. This could lower image
quality.
You are advised to replace the indicated imaging unit when the message
I-UNIT END/REPLACE X appears.
1
Check the message window to see which color imaging unit needs replac-
ing.
Machine
Type Machine Parts
Number Imaging Unit Type Imaging Unit
Parts Number
AM A0FD 013
Imaging Unit -Black (K) A031 00G
Imaging Unit -Yellow (Y) A031 05G
Imaging Unit -Magenta (M) A031 0AG
Imaging Unit -Cyan (C) A031 0GG
EU A0FD 023
Imaging Unit -Black (K) A031 00J
Imaging Unit -Yellow (Y) A031 05J
Imaging Unit -Magenta (M) A031 0AJ
Imaging Unit -Cyan (C) A031 0GJ
Y
PU SH