Konica Minolta bizhub C20X - Manual (Page 183)

Scanning From a Computer Application 169
Windows TWAIN Driver Settings
„ Load
Specify a saved settings file (dat file) for scanning.
„
Save
Save the current settings as a settings file (dat file).
„
Default
Return all settings to their defaults.
„
Help icon
Click to display the Help.
„
About icon
Click to display the software version information.
„
ADF
With scanning documents from the ADF, select whether to scan only the front
side or both sides of the document.
„
Original Size
Specify the original size.
„
Scan Type
Specify the scan type.
„
Resolution
Specify the resolution.
„
Scale
Specify the enlargement or reduction ratio for the selected area.
"
If the resolution is set at 1200 × 1200dpi or higher, a setting larger
than 100% cannot be specified.
„ Scanning mode
Select Auto or Manual. When Manual is selected, a tab appears so that
detailed settings can be specified, for example, for Brightness/Contrast and
Filter.
"
The parameters that can be set differ depending on the scanning
mode that is selected.
"
If Auto is selected as the scanning mode, scanning from the original
glass is performed after a prescan is performed so that a preview
image can be checked.