Konica Minolta bizhub C20X - Manual (Page 199)

Scanning With the Machine 185
6
Press the + or , key to select FINISH , and then press the Select key.
Deleting a Specified Destination Address
A specified destination address (e-mail address, FTP address or SMB
address) can be deleted.
"
Changes made with this procedure will not be applied to the original
data (speed dial destination, group dial destination, etc.).
1
In the main screen (Scan mode), press the + or , key to select the cur-
rent data destination setting, and then press the Select key.
2
To delete an e-mail address, press the + or , key to select CHECK/
EDIT , and then press the Select key. Then, press the + or , key to
select the address to be deleted. To delete an FTP address or SMB
address, continue with step 3.
3
Press the Stop/Reset key.
4
Press the + or , key to select YES , and then press the Select key.
The selected address is deleted.
"
If all specified addresses are deleted, the main screen is dis-
played.
5
To delete another address, repeat the procedure from step 2.
6
To finish deleting addresses, press the Back key.
7
Press the + or , key to select FINISH , and then press the Select key.
Registering/Editing Addresses
Addresses can be registered/edited in the favorite list, as speed dial destina-
tions or as group dial destinations.
"
Addresses can also be registered/edited with PageScope Web Con-
nection or with LSU (Local Setup Utility) on the enclosed Applications
CD/DVD. For details, refer to the Reference Guide on the Documenta-
tion CD/DVD.
"
The same settings menu used to register/edit fax numbers is used to
register/edit addresses. For details on registering/editing fax numbers,
refer to the Facsimile User’s Guide on the Documentation CD/DVD.