Status, error, and service messages 293 – Konica Minolta bizhub C20X User Manual
Page 307
Status, Error, and Service Messages
293
NOT INSTALLED I-UNIT
CHECK x
The indicated imag-
ing unit is not
installed.
Install the indicated
imaging unit.
NOT INSTALLED TONER
CHECK x
The indicated toner
cartridge is not
installed.
Install the indicated
toner cartridge.
NOT REGISTERED
No speed dial desti-
nation or group dial
destination is regis-
tered.
Directly type in the
destination address for
the scan data, or regis-
ter a speed dial desti-
nation or group dial
destination and try
specifying the destina-
tion address again.
OUTPUT TRAY FULL
REMOVE PAPER
The output tray is
full of paper.
Remove all paper from
the output tray.
OVER SEARCH TIME
Communication with
the LDAP server
has timed out.
Establish a connection
with the LDAP server
again.
PAPER EMPTY
LOAD PAPER (xxx)
The indicated paper
tray has run out of
paper.
Load media into the
indicated tray.
PAPER SIZE ERROR
RESET PAPER (xxx)
Paper of the
selected size is not
loaded in a paper
tray.
Load paper of the
selected size into a
paper tray.
REMOVE ORIGINAL
IN ADFR
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.
Place the document on
the original glass.
RESULTS ARE OVER xxx
The LDAP search
results exceed the
maximum specified
with
MAX.
SEARCH RESULT
in the LDAP SET-
TING menu.
Change the maximum
setting, or change the
search conditions (for
example, increase the
length of the key-
word), and then try
performing the LDAP
search again.
This message...
means...
Do this...