Konica Minolta Printgroove POD - Manual (Page 49)

3 Preparation for Use
3-24 Printgroove POD Serve Quick Start Guide
3.5.5 Verifying the Installation (Mac)
To verify the installation, follow this procedure:
1
Select [System Preferences] --> [Hardware] --> [Print & Fax]. The [Print
& Fax] folder opens:
2
[Printgroove POD Driver] should appear in the left-side menu. Select
the driver then click the [Printer Setup...] button. The Printer Info screen
opens.
3
Select [Printer Model] from the drop-down menu located at the top of
the screen. The version information about Printgroove POD Driver is
displayed.
4
Close the screen. You may now use the Printgroove POD Driver.