Konica Minolta BIZHUB 223 - Manual (Page 59)

bizhub 423/363/283/223 4-6
4.3 Optional settings 4
4.3 Optional settings
The following settings can be configured as necessary.
Fax/Scan programs
The destination and scan settings can be registered together as a single program. This is convenient for fre-
quently scanning documents and sending data under the same conditions. Use the touch panel of the ma-
chine to configure the settings.
Reference
- Up to 400 (or 200 if no Hard Disk is installed) typical programs and up to 10 [Temporary One-Touch]
destinations can be registered.
d
Reference
For details, refer to page 9-20.
Custom display
Configure the settings of the screen that appears when Fax/Scan in the control panel is pressed.
d
Reference
For details, refer to page 9-24.