Konica Minolta BIZHUB 223 - Manual (Page 285)

bizhub 423/363/283/223 11-30
11.5 Administrator Mode Overview 11
11.5.9 Fax Settings
Item Description
[Header/Footer
Position] Configure the setting to print the sender or receiving information.
[Line Parameter
Setting] Specify the fax line such as Dialing Method.
[TX/RX Settings] Configure the paper, User Box, and other settings for sending or receiving data.
[Function Setting] Configure the fax settings for Memory RX or Network Fax.
[PBX Connection
Setting] Specify the outside line at PBX connection.
[Report Settings] Configure the setting for a report, for example, Activity Report, to be output when
sending or receiving data.
[Multi Line Set-
tings] Specify the parameters and functions of the extended line.
•
This item is displayed when a line is extended.
[Network Fax Set-
ting] Configure the setting to use network fax.
This item is displayed only when a Hard Disk is installed.
[Header Informa-
tion] Registers sender information and fax number when sending data.
[G3 Fax Print
Quality Settings] Specify whether to correct a received G3 fax according to the resolution.
•
The low resolution means 200 dpi e 100 dpi, 200 dpi e 200 dpi, or 300 dpi e 300
dpi, and the high resolution means 400 dpi e 400 dpi.