Konica Minolta BIZHUB 223 - Manual (Page 158)

bizhub 423/363/283/223 8-3
8.1 Types of reports and lists 8
Reference
- Network Fax function is available only when a Hard Disk is installed.
8.1.2 Lists
To print a list, instruct the machine to print as needed.
[Confidential Rx Report]
(G3) This report is printed automatically upon reception of a confidential docu-
ment if [Confidential Rx Report] is set to [ON] in [Report Settings] of the Utility
mode.
[Polling TX Report]
(G3) The result of transmission to the bulletin board is printed automatically if [Bul-
letin TX Report] is set to [ON] in [Report Settings] in the Utility menu.
[Relay TX Result Report]
(G3) The result of relay distribution is printed automatically if [Relay TX Result Re-
port] is set to [ON] in [Report Settings] in the Utility menu.
[Relay Request Report]
(G3) The result of relay RX is printed automatically if [Relay Request Report] is set
to [ON] in [Report Settings] of the Utility menu.
[PC-Fax TX Error Report]
(G3) This report is printed automatically when an error occurs during PC-Fax
transmission if [PC-Fax TX Error Report] is set to [ON] in [Report Settings] of
the Utility menu.
[Network Fax RX Error
Report]
(I-FAX/IP) This report is printed when an error occurs during reception of network fax if
[Network Fax RX Error Report] is set to [ON] in [Report Settings] of the Utility
menu.
[Print MDN Message]
(I-FAX) If [MDN Message] is set to [ON] in [Report Settings] in the Utility menu, an
MDN message is printed automatically when receiver respond to the send-
er's delivery confirmation request. (The acronym for Message Disposition
Notifications)
[Print DSN Message]
(I-FAX) If [DSN Message] is set to [ON] in [Report Settings] of the Utility menu, a DSN
message is printed automatically when sender receives the message send
back from receiver's mail server upon reception of an E-mail. (The acronym
for Delivery Status Notifications)
[Print E-mail Message
Body]
(I-FAX) The text of the received E-mail message is printed automatically if [Print E-
mail Message Body] is set to [ON] in [Report Settings] of the Utility menu.
Report name Description
List name Description
[Address Book List] Print the details of the address book entries.
[Group List] The details of the group entries can be printed.
[Program List] The details of the program destination entries can be printed.
[Job Settings List] The details of the fax setting in the Utility mode can be printed.
[E-Mail Subject/Text List] Print the subjects and texts of the registered E-mail message.