Konica Minolta BIZHUB 223 - Manual (Page 232)

bizhub 423/363/283/223 10-20
10.4 Administrator Settings (G3) 10
2/3 page
[Print Paper Size] Specify paper size for printing received documents. The initial setting varies
depending on the setting for [Letter/Ledger over A4/A3].
d
Reference
To enable the setting for the print paper size, set [Tray Selection
for RX Print] to [Auto].
[Incorrect User Box No.
Entry] Configure how the machine should react where an unregistered User Box
number is specified for fax RX using a User Box.
•
[Print]: Prints received documents.
• [Show Error Message]:Handles the fax as a communications error.
• [Auto Create User Box]: Automatically creates a User Box with a specified
number and stores documents.
If [Password Rules] is set to ON, this item is not available.
Item Description
[Tray Selection for RX
Print] If you want to fix the paper tray used to print received faxes, select the paper
tray.
The available tray types vary depending on the options that are installed.
[Min. Reduction for RX
Print] Specify the reduction ratio for received document to Full Size or a value be-
tween 87 and 96%.
•
If the reduction ratio for printing is set to [Full Size], [Print Paper Selection]
and [Tray Selection for RX Print] are set to [Auto]. Or [Print Separate Fax
Pages] is set to [OFF].
[Print Separate Fax Pag-
es] If this item is set to ON, a document longer than the standard size is printed
on separate pages.
•
[Print Separate Fax Pages] does not appear if [Duplex Print (RX)] is set to
ON.
[File After Polling TX] Specify whether to delete the original after completing polling TX.
Item Description