Avanti 3025 - Manual (Page 60)

54 Avanti 3025 telephone set
1. Press {FLW TIME} or [4] in the FOLLOW-ME Menu;
you are prompted to enter the start and stop times.
2. Enter four digits for the start time -- for example, 1545
for 3:45 PM.
3. Enter four digits for the stop time -- for example 0000
for midnight.
NOTE
Instead of programming your own start and stop
times, as above, you can have your follow-me start
and stop times automatically correspond to your
organization's start and end of work hours. In other
words, calls made to your extension outside of
work hours (as pre-programmed in the system) will
be forwarded to your follow-me destination.
To program follow-me in accordance
with your organization’s work hours
1. Press {FLW TIME} or [4] in the FOLLOW ME Menu.
2. When you are asked for the start time, dial [#].
3. When you are asked for the stop time, dial [#] again.
Step 3: Select the follow me method
You can have your messages forwarded to either a regular
telephone, pager or to an extension configured behind a
PABX or CENTREX. (See your system administrator for
more details about this third option).
1. Press {FLW METHOD} or [5] in the FOLLOW ME
Menu.
2. Press {PAGER} or [1] for pager or
press {REGULAR} or [2] for telephone or
press {PABX/CNTRX} or [3] for a PABX/CENTREX
C.O. line.
You have now finished programming one of the two follow-
me numbers. If you wish to program a second number,
select {SET OPTION} or [4] from the MAILBOX Menu, and
then {2ND FOLLOW or [2] from the MAILBOX OPTIONS
Menu, and repeat this process for the second number.
UserGuide.book Page 54 Thursday, August 5, 1999 3:40 PM