Airlink EDGE/GPRS - Manual (Page 82)

PinPoint-E EDGE/GPRS - User Guide, version 2.32 76
AT Commands: Misc (Miscellaneous)
This group includes configuration commands which are not specific to other groups.
OPRG=n
S53=[method][d.d.d.d][/ppppp]
Misc (Miscellaneous)
The commands displayed in Wireless Ace and the results of those commands depends on the
model of the modem.
FIGURE 1. Common : Misc
Enables/disables over-the-air firmware upgrading of the PinPoint-E .
When AirLink releases a new verison of ALEOS, you can upgrade your remote modems with
OPRG enabled.
n=0 : Disables
n=1: Enables
Destination IP address, port, and method. These are used as defaults for the D (Dial) AT com-
mand.
method= P : UDP
method=T : TCP
method=N : Telnet
d.d.d.d= IP address or name
ppppp= the port address