Airlink EDGE/GPRS - Manual (Page 124)

PinPoint-E EDGE/GPRS - User Guide, version 2.32 118
PPPoE: Point to Point Protocol over Ethernet
FIGURE 1. Wireless Ace: Connect
b. When Wireless Ace has connected to your PinPoint-E, from the groups on the left, select PPP/
Ethernet under Common.
FIGURE 2. Wireless Ace: PPP/Ethernet
a. Change *HOSTAUTH to 2.
b. Enter a username for *HOSTUID for the PPPoE connection.
c. Enter a password for *HOSTPW for the PPPoE to connection.
Note: Wireless Ace shows the existing values for *HOSTUID and *HOSTPW
encrypted and character padded.
3. Configure *HOSTAUTH, *HOSTUID, and *HOSTPW.
If you leave *HOSTUID and *HOSTPW blank, any computer or device can con-
nect to the PinPoint-E using PPPoE.
Optional Configure *MODEMNAME.
2 - Chap
2 - Enabled/LAN
User Name (encrypted)
Password (encrypted)