Airlink EDGE/GPRS - Manual (Page 135)

PinPoint-E EDGE/GPRS - User Guide, version 2.32 129
Simple Network Management Protocol (SNMP)
FIGURE 3. Wireless Ace: Changing the PinPoint-E Password - Menu Option
The current password will be pre-entered. As you type the new password and confirm it, the char-
acters you type will be obscured by “x”. For the password, you can use numbers, letters, and/or
punctuation.
Trap Destination
*SNMPTRAPDEST needs to be set with the destination IP and port. If either are set to zero or
empty, SNMP traps are disabled.
FIGURE 4. Wireless Ace: *SNMPPORT
Community String
The community string is configurable. The default is “public”.
FIGURE 5. Wireless Ace: *SNMPPORT
SNMP MIB Definition for AirLink
AIRLINK-MIB DEFINITIONS ::= BEGIN
Caution: The password is case sensitive.
“drowssaP” is not the same as “drowssap”.
Note: Traps are sent out according to the SNMP security level (i.e. if the security
level is 2, traps will be authenticated and encrypted). Currently, the only trap sup-
ported is LinkUp.