Information and status – Airlink EDGE/GPRS User Manual
Page 76
PinPoint-E EDGE/GPRS - User Guide, version 2.32
70
AT Commands: Information and Status
Most of the commands in the “Info” and “Status” groups as well as other groups have read-only
parameters. They only provide information and cannot be changed using Wireless Ace (some can
be changed using AT Commands with a terminal application).
Information and Status
The commands displayed in Wireless Ace and the results of those commands depends on the
model of the modem.
The commands of these two groups are intermingled. The Status Group has more
fields that can be displayed on most screens, either resize your screen or use the
scroll bar on the side to display the remainder.
Note:
Those commands which are not displayed with Wireless Ace may require
PassThru mode.
FIGURE 1.
Info Group