Airlink EDGE/GPRS User Manual

Page 73

PinPoint-E EDGE/GPRS - User Guide, version 2.32

AT Commands

•

Required variable parameters are denoted with italicized text, example,

. The

is variable

and noted in the parameters column.

•

Optional parameters are denoted with square brackets

[ ]

•

Most commands with parameters can be entered with

to read the current value (for example,

AT&D? will respond with “2” if the default has not been changed).

•

AT Commands are not case sensitive. A capital “E” is the same as a lower-case “e”.

•

When you are using a terminal connection, if you enter a command which is recognized by the
PinPoint-E, it will respond with “OK”. If the command is not recognized, the response will be
“ERROR”.

•

Those commands applicable only to certain model numbers of the PinPoint-E will be noted.

Caution:

Symbols listed with commands, such as

, or

, are part of the com-

mand and must be included. Commands with symbols other than

may require

PassThru mode.