Alamo JD-5225 - Manual (Page 22)

© 2005 Alamo Group Inc. Section 3 - 2
Switch Blade (JD-5105-5205-5225-5325- 5425-5525, Asy. Man) 05/05
Pump / Driveshaft Schematic - 5425 & 5525
Drive Shaft, 3/4" w/ 3/16"
Keyway X 7/8" w/ 13 spline
Tractor Engine Pulley
Pulley Adapter,
Pump Drive Schematic:
This Section covers the installation of Pump Drive Components, Pump Assembly Some
precautions that must be followed during the Assembly Process before unit is ever started for the first
time.
1234
1234
1234
1234
12345
12345
12345
12345
12345
123456
123456
12345
12345
12345
1234567
1234567
1234567
1234567
1234567
1234567
7/8" X 13 Spline 3/4" w/ 3/16" Keyway
Coupling Flange, P/N 0062000 ( 3/4" Bore
w/ 3/16" keyway, 1/4" setscrew )
123456
123456
123456
12345
12345
12345
12345
1234
1234
Flange, P/N 02974359
( 5/8" Bore w/ 9 Spline ) Center Coupling, w/ Nut & Bolt Set
Flange Mounting Bolts
& Locknuts (4 ea.)
12345
12345
12345
123456
123456
123456
Pump Mount,
1234
1234
1234
1234
1234
123456
123456
Pump Assembly
P/N 02973992
Hub, P/N 02702900
P/N 02979436
P/N 02982530
Use Existing Bolt & Lockwasher
From Crankshaft Pulley
( 4 ea.)
Bolts, P/N 02976344
Lockwasher, P/N 00022200
( Included W/ Center Coupling )
Hub
Bolts, P/N 02975692
Lockwasher, P/N 02971158
( Set Of 4 Bolts)
Bolts, P/N 00023100
Lockwasher P/N 00012101
Locknuts, P/N 00015800
Setscrew, P/N 02957080
NOTE: Shown above is the pump - drive component schematic. There are some items from the tractor
that will be reused and some items that are only available as an assembly. The tractor from the
manufacturer has a thin spacer bolter to the crankshaft pulley, remove this spacer and reinstall the spacer
from Alamo Industrial using the same four bolts that mounted the tractor factory spacer.