Lenovo ThinkPad Edge E145 - Manual (Page 111)

Defining a Network Boot sequence
When the computer wakes on LAN, the computer boots from the device as specified on the Network Boot
menu, and then follow the boot order list on the Boot menu.
To define a Network Boot sequence, do the following:
1. Start the ThinkPad Setup program. See “ThinkPad Setup” on page 82.
2. Select Startup ➙ Network Boot. The boot device list is displayed.
3. Select a boot device to make it as the top boot priority.
4. Press the Fn+F10 key to save and exit.
Note: You can press the Fn+F9 key to restore to the factory default settings.
Chapter 7 . Advanced configuration 95