Lenovo ThinkPad 10 - Manual (Page 69)

The following table lists the Config menu items.
Notes:
• Default values are in boldface.
• On each submenu, tap the default value to show selectable options and tap a desired option.
• Some items are displayed on the menu only if the tablet supports the corresponding features.
Table 1. Config menu items
Menu item Submenu item Selection Comments
UEFI IPv4 Network Stack • Off
• On
Enable or disable Network
Stack for PXE Boot.
UEFI IPv6 Network Stack • Off
• On
Enable or disable Network
Stack for PXE Boot.
Network
UEFI PXE Network Stack • IPv6 First
• IPv4 First
Enable or disable Network
Stack for PXE Boot.
Power Cool mode • On
• Off
Enable or disable cool
mode.
Boot Device List F12 Option • On
• Off
If this option is set to On,
you can open the boot
device menu by pressing
F12 when you turn on the
computer. Startup option
Boot Order Lock • On
• Off
Enable or disable boot
order lock.
Security menu
If you need to set the security features of your tablet, tap Security from the ThinkPad Tablet Setup menu.
The following table lists the Security menu items.
Notes:
• Default values are in boldface. The default settings are already optimized for you. If you consider
changing the tablet configuration, proceed with extreme caution. Setting the configuration incorrectly
might cause unexpected results.
• In each submenu, tap the default value to show selectable options and tap a desired option.
• Some items are displayed on the menu only if the tablet supports the corresponding features.
Table 2. Security menu items
Menu item Submenu item Value Comments
Supervisor Password See “Supervisor
password” on page 55. Password
Password Status • Disabled
• Enabled
Chapter 7 . Advanced configuration 61