Lenovo ThinkStation S20 - Manual (Page 29)

Figure 20. Connecting a 2.5-inch SATA hard disk drive
Figure 21. Connecting a 3.5-inch SAS hard disk drive
7. If you are installing a SATA hard disk drive, connect the other end of the signal cable to one of the
available SATA connectors on the system board. If you are installing a SAS hard disk drive, connect
the signal cable to one of the SAS connectors on the SAS adapter card. See “Identifying parts on
the system board” on page 8.
What to do next:
• To work with another option, go to the appropriate section.
• To complete the installation, go to Chapter 4 “Completing the parts replacement” on page 47.
Replacing the battery
Your computer has a special type of memory that maintains the date, time, and settings for built-in features,
such as serial-port assignments (configuration). A battery keeps this information active when you turn
off the computer.
The battery normally requires no charging or maintenance throughout its life; however, no battery lasts
forever. If the battery fails, the date, time, and configuration information (including passwords) are lost. An
error message is displayed when you turn on the computer.
Chapter 3 . Installing options and replacing hardware 23