Lenovo ThinkPad T43p - Manual (Page 51)

problem. Starting the Rescue and Recovery workspace is easy. To open
Rescue and Recovery, do the following:
1. Turn off your PC, then turn it on again.
2. Watch the screen carefully while your PC starts. When the “To
interrupt normal startup, press the blue Access IBM button ” message
is displayed at the lower left of the screen, press the blue Access IBM
button. The Rescue and Recovery workspace opens. A window such as
this will appear:
Note: The window may differ on some models.
3. After the Rescue and Recovery workspace opens, you can do the
following:
v Rescue and Restore your files, folders, or backups.
v Configure your system settings and passwords.
v Communicate by using the internet and link to the support site.
v Troubleshoot and diagnose problems using diagnostics.
If you are using the ThinkPad T41/T41p Series computer, you can select
from the following icons:
v Start setup utility opens the BIOS Setup Utility program.
v Recover to factory contents erases all files on primary partition--the
C drive--and installs the software contents present when your PC
was manufactured.)
Solving computer problems
Chapter 2. Solving computer problems 29