Lenovo ThinkVantage (Client Security Solution 8.21) - Manual (Page 68)

4. Use the ThinkVantage fingerprint software to enroll your fingerprints with the external fingerprint
sensor. If it does not automatically start, click Start ➙ Programs ➙ ThinkVantage ➙ ThinkVantage
Fingerprint Software to start the enrollment.
5. Enter your Windows password when prompted and then select a finger to enroll.
6. Follow the prompts on the computer screen to enroll your finger using the external fingerprint sensor.
7. Click Settings at the top of the window.
8. Select the Use fingerprint scan instead of password when logging into Windows check box, click
OK, and then click Close to close the window.
9. Restart the computer and ensure that your fingerprint can be used to log on to Windows with the
external fingerprint sensor.
10. Use fingerprint enrollment to enroll your fingerprints with the internal fingerprint sensor. If it does not
automatically start, click Start ➙ Programs ➙ ThinkVantage ➙ Lenovo Fingerprint Software to start
the enrollment.
11. Enter your Windows password when prompted and then select a finger to enroll.
12. Follow the prompts on the computer screen to enroll your finger using the internal fingerprint sensor.
13. Click Settings at the top of the window.
14. Select the Use fingerprint scan instead of password when logging into Windows check box, click
OK, and then click Close to close the window.
15. Restart the computer and ensure that your fingerprint can be used to log on to Windows with the
internal fingerprint sensor.
Windows XP logon
To log on to the Windows XP operating system, you can use either the AuthenTec fingerprint sensor or
the UPEK fingerprint sensor at any time.
Scenario 1 – ThinkPad T400 with USB keyboard (not attached to domain)
Use the Windows XP Welcome screen.
1. Install the Lenovo fingerprint software with version 3.2.0.275 or later.
2. Install the ThinkVantage fingerprint software with version 5.8.2.4824 or later.
3. Enable the Windows XP Welcome screen.
a. Open Control Panel ➙ User Accounts.
b. Click Change the way users log on or off.
c. Select the Use the Welcome screen check box.
If the check box is not available, refer to “Scenario 2 – ThinkPad T400 with USB keyboard (attached to
domain)” on page 63.
4. Click Start ➙ Programs ➙ ThinkVantage ➙ Lenovo Fingerprint Software to start the enrollment.
5. Enter your Windows password when prompted and then select a finger to enroll.
6. Follow the prompts on the computer screen to enroll your finger using the internal fingerprint sensor.
7. Click Settings at the top of the window.
8. Select the Use fingerprint scan instead of password when logging into Windows check box, clear
the Disable fast user switching support check box, click OK, and then click Close to close the window.
9. Reboot the computer and ensure that your fingerprint can be used to log on to Windows with the
internal fingerprint sensor.
10. Attach the external USB keyboard.
62 Client Security Solution 8.21Deployment Guide