Management console tool, User-specific commands – Lenovo ThinkVantage (Client Security Solution 8.21) User Manual

Page 51

Chapter 4. Working with ThinkVantage Fingerprint Software

The fingerprint console must be run from the Fingerprint Software installation folder. The basic syntax is
FPRCONSOLE [USER | SETTINGS]. The USER or SETTINGS command specifies which mode of operation
will be used. The full command is then “fprconsole user add TestUser”. When the command is not known or
not all parameters are specified the short command list is shown together with the parameters.

To download the Fingerprint Software and Management Console, see the following Lenovo Web site:
http://www.lenovo.com/support/site.wss/document.do? sitestyle=lenovo&lndocid=HOME-LENOVO

Management console tool

This section provides information about user-specific commands and global setting commands.

User-specific commands

To enroll or edit users, the USER section is used. When the current user does not have administrator
rights, the console behavior depends on the security mode of the Fingerprint Software. Secure mode: no
commands are allowed. Convenient mode: ADD, EDIT and DELETE commands are possible for standard
user. However, the user can modify only his own passport (enrolled with his user name). The following is
the syntax:

FPRCONSOLE USER command

where command is one of the following commands: ADD, EDIT, DELETE, LIST, IMPORT, EXPORT.

Table 25. User-specific commands

Command

Syntax

Description

Enroll new user
Example:
fprconsole user add
domain0\testuser

fprconsole user add
testuser

ADD [username [| domain\
username]]

If the user name is not specified, then
the current user name is used.

Edit enrolled user
Example:
fprconsole user edit
domain0\testuser

fprconsole user edit
testuser

EDIT [username [| domain\
username]]

If the user name is not specified, then
the current user name is used.
Note: The enrolled user must verify his
fingerprint first.

Delete a user
Example:
fprconsole user delete
domain0\testuser

fprconsole user delete
testuser

fprconsole user delete
/ALL

DELETE [username [| domain\
username | /ALL]]

The /ALL flag will delete all users
enrolled on this computer. If the user
name is not specified then the current
user name is used.

Enumerate enrolled users

List

Lists the enrolled users.