Kodak ESP C310 - Manual (Page 13)

www.kodak.com/go/aiosupport 7
KODAK ESP C310 All-in-One Printer
The Wi-Fi connectivity LED blinks as the printer searches for available wireless
networks within range, then displays the list in order of signal strength. For
example:
If there are more networks than can be shown on the LCD, a (page down)
symbol appears in the bottom right of the display.
4. Press to select your network, then press OK .
If you don’t see your network in the list, or if you want to change your network,
select
Rescan for Wireless Networks , then press OK .
NOTE: If the name of your network is not listed, make sure your wireless router
is turned on and within range.
5. If your network requires a password, use the LCD keyboard to enter your
Security String.
6. When the confirmation message appears, press OK.
On the control panel, press , , or
to select the letters and numbers, using the
correct uppercase and lowercase letters.
Press
OK after each character. When you are
finished, select DONE, then press OK