Kodak ESP 7250 - Manual (Page 77)

www.kodak.com/go/aiosupport 71
KODAK ESP 7200 Series All-in-One Printer
Status lights
The status lights indicate the condition of the printer. There are two status lights on
the printer, one that indicates power, the other indicates Wi-Fi status.
Power status light
Wi-Fi status light
Power light What it means
Off The printer is turned off.
• Press the on/off button to turn on power.
The printer does not have power.
• Make sure that the power cord is plugged into the back of the
printer and into an electrical outlet, and that the electrical
outlet has power.
Blinking The printer is busy.
• Wait for the printer to finish the task.
On The printer is ready.
Wi-Fi status light What it means
Off The Wi-Fi radio is either turned off or is turned on but not
connected to a wireless network.
Blinks continuously The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.
Blinks intermittently The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted or is too weak to send signals.
To find and connect to an available wireless network within
range, press
OK, turn the Wi-Fi radio off, and run the WiFi Setup
Wizard (see Connecting to a wireless network, page 5 ).
On The Wi-Fi radio is turned on and there is a working connection
between the printer and a wireless network.