Kodak ESP 7250 - Manual (Page 16)

Networking Your Printer
10 www.kodak.com/go/aiosupport
Printing the network configuration
To print the current network configuration:
1. Load plain paper into the printer. (See Loading paper in the main paper tray,
page 17 .)
2. Press Home .
3. Press to select Network Settings , then press OK .
4. Press to select Print Network Configuration , then press OK .
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer. Go to
www.kodak.com/go/aiodownloads and follow the on-screen instructions.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you have an ESP 7
printer and now you are adding an ESP 7250 printer), you must install the software
for the newer model.
If you are connecting to another ESP 7250 printer or to a previous model:
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility .
• If your wireless all-in-one printer (example: KodakESP7200+0229) is not
listed:
a. Select No, my printer is not listed , then click Next .
b. From the drop-down list, select your printer.
c. Select Network - Wireless/WiFi , then click Next .
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESP7200+0229) is listed:
a. Highlight the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed , then click Next .
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done .
On a computer with MAC OS:
1. Select Apple > System Preferences .
2. Under Hardware, select Print & Fax .
3. In the Print & Fax dialog box, click + .
4. Select your printer from the list, then click Add .