Kodak ESP 7250 - Manual (Page 33)

www.kodak.com/go/aiosupport 27
KODAK ESP 7200 Series All-in-One Printer
Printing documents
To print a document from your computer:
1. Open the document.
2. Select File > Print .
3. In the Print dialog box, select your KODAK Printer.
4. Choose the pages to print, number of copies, etc, then click OK (on a computer
with WINDOWS OS) or Print (on a computer with MAC OS).
Printing two-sided documents
Print two-sided documents either automatically with the built-in duplexer or by
manually rotating and reloading the paper.
Automatic two-sided printing
The duplexer can print two-sided documents automatically on:
• plain paper
• standard paper sizes
– letter (8.5 x 11 in. / 22 x 28 cm)
– A4 (8.3 x 11.7 in. / 21 x 30 cm)
– executive (7.3 x 10.5 in. / 18 x 27 cm)
– B5 (6.9 x 9.8 in. / 18 x 25 cm)
NOTE: The paper width must be 3.9 to 8.5 in. / 10 to 22 cm. The paper length must
be 7 to 11.7 in. / 18 to 30 cm.
The duplexer cannot print:
• borderless prints
• poster layout
Automatic two-sided printing from a computer with WINDOWS OS
To print two-sided documents from a computer with WINDOWS OS using the
duplexer:
1. Load plain paper into the paper tray.
2. Open the document you want to print, then select File > Print .
3. In the Print dialog box, make sure that KODAK ESP 7200 Series AiO is selected,
then click Properties .
4. Select the Layout tab.
5. Select Automatically with Duplexer .
6. Under Flip on, select Long edge or Short edge , then click OK .
7. Click OK .