Kodak DP2000 - Manual (Page 27)

Using the Projector
21
The Remote Control
The projector ships with a remote that has four function buttons, a
disk mouse and two mouse buttons, one on the top of the remote and
one on the bottom.
Point the remote control at the projection screen or at the front or rear
of the projector. The range for optimum operation is about 25 feet
(7.6 m). If you point the remote at the projection screen, the distance
to the screen and back to the projector must not be more than 25 feet
(7.6 m). For best results, point the remote directly at the projector.
Note: If the remote is inactive for several minutes, it “sleeps” to
conserve battery life. Press any button except the disk mouse
to re-activate the remote.
simulates the right mouse button
simulates the left mouse button
disk mouse