Kodak DP2000 - Manual (Page 17)

11
Setting up the Projector
This section describes how to:
• determine where to position the projector
• connect the projector to a computer or a video player
• turn on and turn off the projector
If you are experienced in setting up presentation systems, use the
Quick Start card that came with the KODAK DP2000 Digital
Projector. Otherwise, follow the procedures described here.
Positioning the Projector
Note: If you want to project from behind a translucent screen, set up
the projector behind your screen. See “Rear Projection” on
page 31 to reverse the image.
1. Make sure your projector is on a flat surface. It must be within 10
feet (3 m) of your power source and within 6 feet (1.8 m) of your
computer.
2. Position the projector the desired distance from the screen.
• The distance from the lens of the projector to the screen and
the zoom setting determine the size of the projected image as
shown here. For more information about image sizes at
minimum and maximum zoom settings, see “Projected Image
Size” on page 61.
3. Make sure the projector and your computer are turned off.
20 ft.
3.2
ft (
.9
m
).
6.
2 f
t (1
.9
m
).
10
.3
ft (
3.1
m
)
1.5 m
6 m
12 ft.
3.7 m
5 ft.
2.
5 f
t (.
8 m
).
7.
8
ft (
2.4
m
).
13
ft (
4 m
)