Kodak DP2000 User Manual
Page 22
User’s Guide KODAK DP2000 Digital Projector
16
3. Plug the plug the audio adapter white connector into the left
“audio out” port on your video player. Plug the adapter red
connector into the right “audio out” port on the video player.
4. Plug the other end of the audio adapter into the audio cable.
5. Plug the audio cable into the "audio in"
connector on the
projector.
The projector is compatible with these major broadcast video
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM. It
automatically adjusts to optimize its performance for the incoming
video. See “Video Standard” on page 30 for details.
audio cable
S-video
audio
cable
adapter
Connecting with
S-video cable