Printer-dock-status lights – Kodak G610 User Manual
Page 44
38
www.kodak.com/go/support
Troubleshooting
Printer-dock-status lights
Camera battery light
Light status
Cause
Action/solution
Light is off
Camera not properly seated on
connector.
Reseat the camera on the printer
dock (
).
Unrecognized battery type
installed, or camera does not
support charging.
Install a Kodak Ni-MH
rechargeable digital camera
battery or Kodak Li-Ion
rechargeable digital camera
battery. See your camera user’s
guide for battery compatibility and
other charging options.
AC power cord not connected.
Connect the AC power cord
(
).
Light glows green
Camera just placed on printer
dock.
None; dock is checking the charge
status of the battery.
Battery fully charged.
None required.
Light glows amber
Battery charging.
Leave the camera on the dock to
continue charging or to maintain
charge.
Light blinks fast amber
Battery not properly installed.
Re-install the battery.
Battery or connector pin damaged. Check for damage.
Battery exhausted.
Refresh the battery (
).
Light blinks slow
amber
The Ni-MH battery refresh cycle in
progress: discharging (light turns
off as discharging progresses).
Leave the camera on the dock to
continue refresh cycle (
).