Kodak G610 - Manual (Page 13)

www.kodak.com/go/support 7
2
Setting up your digital camera
Docking and charging the camera
Docking your digital camera lets you make prints directly from the camera, transfer
pictures from the camera to the computer, and charge the camera battery.
This printer dock is ImageLink print-system compatible. You can dock not only Kodak
EasyShare digital cameras, but other brands of ImageLink system-compatible digital
devices.
NOTE: Not all cameras are compatible for charging on the G610 printer dock. See your camera user’s guide
for dock compatibility.
Docking the camera
1 Connect your printer dock power (see page 3 ) and
attach a custom camera insert (see page 2 ).
2 Load a Kodak Ni-MH rechargeable digital camera
battery KAA2HR, or a Kodak Li-Ion rechargeable
digital camera battery into the camera for charging.
See your camera user’s guide.
NOTE: Your printer dock charges only Kodak Ni-MH KAA2HR and
Li-Ion rechargeable batteries.
3 Place the camera on the printer dock. Push camera
down to seat the connector.
The battery status light on the printer dock lights up if
a rechargeable battery is in the camera, and an
initializing message appears on the camera screen.
4 Keep the camera strap clear of the paper path to the front and rear of the printer
dock.
The camera is now powered by the printer dock instead of the camera battery.