Kodak G610 User Manual
Page 38
32
www.kodak.com/go/support
Troubleshooting
Printing stops
during mid-print
(paper stops
feeding)
IMPORTANT: Use only Kodak color cartridge & paper kits (with
symbol) for your printer dock. Do not use inkjet paper.
■
Check the power connection.
■
Check the paper:
1
Remove the paper tray (
2
Check the paper slot on the back of the printer dock.
3
Remove loose paper from the printer dock. If paper is jammed,
.
4
Carefully "fan" the paper to keep the sheets from sticking together
(
5
Reload the tray. Do not load more than 30 sheets of paper
(see
upper limit line,
, inside tray)
.
6
Re-install the tray, then press to resume printing.
■
Clean the paper-feed rollers (
).
Print is smudged
■
Fingerprints may be on glossy side of paper. Handle paper by the edges
(
).
Print is spotted
■
Check for dirty paper; wipe paper gently with a dry, lint-free cloth to
remove dirt. For excessive dirt or debris, thoroughly clean the paper tray,
and load new paper (
). Check and clean the paper-feed rollers
(
).
NOTE: Keep paper in the original protective wrap, and remove and close the paper
tray and paper tray door to keep dust and debris from collecting on the paper
or inside the printer dock (
If...
Try the following