Kodak G610 - Manual (Page 26)

20 www.kodak.com/go/support
Using the printer dock with a computer
Transferring pictures from your digital camera
1 Make sure Kodak EasyShare software is installed (see page 17 ), and the printer
dock is connected to your computer (see page 19 ).
2 Place the camera on the printer dock (see page 7 ).
3 Press the Transfer button, , on the printer dock.
Kodak EasyShare software opens on your computer and the printer dock Transfer light
blinks green.
4 Use Kodak EasyShare software to transfer pictures from the camera to your
computer. See the Kodak EasyShare software Help for details.
NOTE: The Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink
until the connection is no longer available or is ended from the computer.
NOTE: With the software installed, pressing the Transfer button establishes drive connections for the
docked camera. You can view, copy, delete, and manage files on the new drives on the computer.
See your computer documentation for details.
Canceling transferring
To cancel transferring, do one of the following:
■ Press and hold the Cancel button for 2 seconds.
■ Remove the docked camera.