Kodak G610 - Manual (Page 18)

12 www.kodak.com/go/support
Printing without a computer
The paper cycles four times during the printing
process. The first three passes apply layers of yellow,
magenta, and cyan colors to the print, and the fourth
pass applies the Kodak XtraLife
TM coating that protects
and preserves the image.
IMPORTANT: Do not pull out the print. The printer dock automatically ejects the finished
print after the fourth pass.
Selecting pictures on your camera for printing
NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging
pictures on other brands of ImageLink system-compatible cameras, see the camera user’s guide.
1 Press the Share button on your camera.
2 Press to locate a picture.
3 Make sure Print is highlighted. (To tag all pictures in the current image storage
location for printing, press to highlight Print All.) Press the OK button.
4 Press to select the number of copies (0–99). The default is one. Zero
removes the tag for a selected picture.
■ To apply a print quantity to other pictures, press to locate them. Keep
the print quantity as is, or press to change it.
5 Press the OK button.
6 Press the Share button to exit.