Vollrath JUNIOR Out-of-Chamber Vacuum Pack Machine - Manual (Page 20)

20
VACUUM PACKING MACHINE
CONDITIONNEUSE SOUS VIDE
MAQUINA DE VACÍO
Operating and service manual / Mode d’emploi et d’entretien
Manual de uso y mantenimiento / Ed. 01 - 2011
REV. 00 - Cod.: 1500387
EN
JUNIOR
Fig. 1
3.3 VACUUM CREATION INSIDE OF CONTAINERS
• Connect the appliance to a power socket.
• Switch the machine on by pressing the button (1) “ON/OFF” until all the lights on the buttons come on briefly.
• Lift the machine lid (A).
• Place the special suction tube equipped with vacuum fitting on the nozzle (B) located inside the gasket.
• Undo the ring nut (C) of the valve located on the cover of the container to be used so that the inside gasket can move.
• Place the cover on the container (jar, pot, bowl, etc.) inside of which the vacuum is to be created.
• Fix the evacuation fitting (D) on the cover valve.
• Press the button “PUMP” and press down hard on the cover at first (Fig. 1) to create a minimum vacuum inside the container; the machine will then
create the complete vacuum and, once reached, the machine will automatically turn off and be ready for a new cycle.
• Screw down the valve ring nut to prevent the return of the air.
B
•
•
C
D
A
•
3.4 STOPPING OF PACKAGING CYCLE
If the packaging cycle has to be stopped for any reason, (suction of liquids, bag not correctly positioned, etc.) carry out the following:
• Press the button (1) “ON/OFF” to stop the appliance.
• Press the button (1) “ON/OFF” again to release the movable lid (A - Fig. 2).
Fig. 2
A
•
VACUUM CREATION
Container and related components not
available through Vollrath.